Static charges and electricity may seem harmless. They are the small shocks you get after rubbing your socks on the carpet and touching a doorknob or another person &#; a little jolt and no harm done. However, static electricity and electrostatic discharge (ESD) can damage delicate electronic goods or even cause fires, resulting in thousands of dollars of damage.
For more esd aluminum foil zip-lock baginformation, please contact us. We will provide professional answers.
Anti-static and static shielding bags are two protective packaging methods that can stop static electricity buildup and prevent ESD damage during transport and shipping.
Anti-static bags prevent the buildup of static electricity in goods. They are usually used for delicate products that are vulnerable to electrical damage. Static electricity builds when objects contact each other. Electrons move between the items, causing one to become negatively charged and the other positively charged. This difference in charges results in static electricity.
When static electricity is discharged, it can damage delicate components of electronics, including microprocessors and internal circuits. If enough static electricity is built up and discharged, it can set fire to flammable materials or cause an explosion. Static electricity can remain built up in products and only be released once unloaded or on a shelf.
Anti-static bags are made from polyethylene terephthalate plastic and special additives. These materials are dissipative, meaning anti-static bags are immune to the transfer of electrons so they don&#;t hold or generate a charge. Dissipative anti-static bags can also remove or break down any static electricity charge that may have built up. The bags come in various colors, including black, blue and clear, but most anti-static bags are pink. Some are semi-reflective and silver.
Anti-static bags are used when shipping and storing parts or products sensitive to static electricity. They are also used to transport products that aren&#;t sensitive to static but are in a static-sensitive environment. Anti-static bags are used in the packaging when transporting and storing physical non-electrical parts used in electronics, such as hard drives, motherboards, chips and other electrical components sensitive to damage from static electricity.
Parts must be placed inside the bag to be protected from static electricity. Anti-static bags don&#;t protect products from ESD.
Static shielding bags protect products from ESD and related damage during transportation and storage. ESD occurs when there is a buildup of static electricity between objects. Static electricity is discharged when objects touch each other again or come in contact with another object. ESD can significantly damage electronics and electrical components.
A static shielding bag acts as a Faraday cage, dissipating the charge by distributing it along the bag. They also prevent any ESD from reaching the components sealed in the bag. Static shielding bags are also anti-static. They have a dissipative coating that stops the buildup of static electricity.
ESD protection bags are multilayered to create a Faraday cage and give the bags their shielding properties. Most shielding bags have three layers:
The multiple layers of a static shielding bag mean they can also act as a moisture barrier and prevent oxidation. To work correctly, static shielding bags must be properly sealed. It is essential to avoid puncturing or damaging the layers as this limits the efficacy of the Faraday cage and the dissipative coatings.
Like anti-static bags, shielding bags are used when transporting products vulnerable to ESD and in environments that are prone to the buildup of static electricity. Unlike anti-static bags, they can protect materials that can catch fire when hit with ESD. Static shielding bags are the safest option for transporting static-sensitive goods.
Static shielding bags are used to transport memory cards, semiconductors, disk drivers, certain explosive or volatile substances, processors and other sensitive electrical components.
The main difference between static shielding and anti-static bags is how they deal with static charges and ESD. Anti-static bags focus on stopping the buildup of a static electrical charge, but they don&#;t offer any protection from ESD. Static shielding bags protect goods from internal and external static buildup and ESD.
Which one you decide to use to protect your goods depends on various factors, including where you are sending them, what they are made of and your budget. The U.S. military requires electrical goods and components to be shipped in static shielding materials that are MIL-PRF- compliant.
If you want to learn more, please visit our website electro static discharge film.
Static shielding bags come with various benefits. Other than protecting electrical goods and components from static charges and ESD, they also provide a moisture barrier when heat-sealed and can protect products from oxidation. In addition, ESD protection bags can be used in fire prevention. They can stop strong static charges from igniting flammable materials, reducing the potential for fires and explosions.
The main disadvantages of shielding bags include the following:
Anti-static bags are a cost-effective way to stop static charges from building up in goods. If they are thick enough, they can be puncture resistant and provide an additional layer of physical protection to fragile and delicate goods.
The main disadvantage of anti-static bags is that they don&#;t protect against ESD. They also cannot act as moisture or oxidation protection.
When choosing between the two bags, you should consider every aspect of transport and storage. If ESD is not a concern, anti-static bags are sufficient protection. They can also help stop the buildup of static electricity in non-electronic parts to reduce the possibility of ESD. A protective packaging solution that strategically uses both bags can help you cost-effectively protect your goods during transport and storage.
As manufacturers of anti-static and static shielding bags, Edco Supply Corporation can help protect your important electrical goods from static electricity and ESD. We manufacture a range of standard sizes and can produce custom sizes up to 50 inches by 200 inches to suit your products.
Look at our range of anti-static and static shielding bags, or request a quote from us today!
The terms &#;static shielding&#; and &#;anti-static&#; seem to be interchanged everywhere. Even Wikipedia offers the terms up as close synonyms, but there are huge differences between static shielding and and anti-static materials. They are not the same thing, and should not be treated as such.
Static shielding bags prevent the build up of static electricity (meaning they have anti-static properties), but they ALSO protect from electrostatic discharge (ESD). These multi-layer materials create a Faraday Cage protecting components from ESD. The inner layer is a static dissipative polyethylene surrounded by a layer of aluminum shielding. The next layer is made of polyester, with an outer layer made of a static dissipative coating. Unlike anti-static bags, static shielding bags protect components from static charges both inside and outside of the bag. In order to provide ESD protection, material is fashioned into a bag or enclosure of some sort and products are sealed inside the bag. No seal, no guarantee of protection. And be sure to pad sharp components and don&#;t use staples. They can compromise the static shielding properties of the bags.
Another class of static shielding bags are moisture vapor barrier (MVB) shielding bags. These materials shield from electromagnetic interference (EMI) as well as radio frequency interference (RFI) and static. This is mainly accomplished by using a much thicker metal layer, inhibiting the moisture vapor transmission rate (MVTR) by a factor of over 20 times more compared to ordinary shielding bags.
Anti-static materials, on the other hand, ONLY prevent the build up of static electricity. The material itself will not generate or hold a triboelectric charge, so it will not be a carrier that introduces static into a static controlled environment. These materials DO NOT protect from electrostatic discharge (ESD). Anti-static bags and materials are ideal for packaging non-static sensitive parts used in electronics manufacturing, like nuts and bolts or manuals. Many people think of pink polyethylene bags when they think of anti-static bags. Pink poly anti-static bags should never be used as the only packaging to protect electronic components from electrostatic discharge.
So what do you need? It depends on your products and where you are sending them. The US military requires all electronic components (circuit boards, hard drives, sound cards, etc) to be packaged in materials that meet the stringent specifications of MIL-PRF-, which is a static shielding material. If you are not shipping or storing electronic components or items that can be damaged by static, but your products may be shipped to an area that is static controlled, you can get by with the pink poly, anti-static material.
Call to order ESD bags with anti-static AND static shielding properties at 1-800-644-, or order rolls of ESD material online.
We have noticed products claiming to be MIL-PRF- that are not certified to this MIL SPEC. Be sure to always check product documentation and the government maintained Qualified Product List for MIL-PRF- to make sure you are using material that meets the standards for your military packaging project.
For more information, please visit pet aluminum sticker.